Disclosure
This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
I live off-grid, so my generator runs for hours during storms. The biggest hassle was always having to shut it down just to add fuel — especially in the rain. That’s why I tested the Akkkan Generator Covers While Running, 38 “Lx28” Wx27 “H, Top Can Be Opened To Add Fuel,900D+210D Heavy Duty Waterproof and found it solves that exact problem.
This cover is built for owners of big 10000+ watt frame generators who need all-weather protection while the machine is running. The top zipper for refueling is a genuine time-saver, though the 2.8-pound fabric is lighter than some heavy-duty covers I’ve used. Keep reading to see if it fits your setup.
- 【UPGRADE DESIGN】(1) The top of the generator cover can be opened for easy refueling. (2) There...
- 【HEAVY DUTY MATERIAL】The generator running cover is made of 900D+210D heavy duty Oxford fabric...
- 【CONVENTIONAL SIZE】The generator cover is 38X28X27 inches, suitable for most 10000+W frame type...
What Stands Out — Key Features
- Top-Opening Refueling: The top zips open so I can add gas without removing the whole cover or shutting the generator down. It’s the main reason I bought this cover.
- Two Large Pockets: There are big pockets on the front and rear that hold my fuel nozzle, gloves, and a small tool kit. Keeps everything handy while the generator runs.
- Transparent PVC Windows: Both sides have roll-up PVC windows that let me check the fuel level and control panel without lifting the cover. They stay clear even after a few uses.
- Full Perimeter Zipper: The zipper goes all the way around, so I can completely open the cover for maintenance or storage. Makes getting it on and off a lot easier than a slip-over design.
- 900D+210D Heavy Duty Fabric: The outer layer is 900D Oxford cloth with a water-resistant and UV-resistant coating, plus a 210D inner lining and a PVC material layer. It’s held up to a few rain showers so far.
- Fits Most 10000+ Watt Frame Generators: At 38″L x 28″W x 27″H, it’s designed for models like the PULSAR G12KBN, WESTINGHOUSE WGEN9500, CHAMPION 100812, and GENERAC GP8000E. Check your generator’s dimensions first.
- All-Weather Use: I leave it on while the generator runs in rain and dusty conditions. It protects against dust, fallen leaves, and light snow without trapping too much heat.
Full Specifications
Pros & Cons — The Honest Take
✅ What I Like
- The top zipper lets me add fuel without shutting down the generator, which is a huge time-saver during long power outages.
- The 900D outer fabric plus the 210D inner lining and PVC layer keep the generator dry in steady rain, and I haven’t seen any leaking.
- Both side windows are made of transparent PVC that rolls up, so I can check the fuel gauge and control panel without lifting the cover.
- The two large pockets on the front and rear easily hold my gloves, a fuel nozzle, and a small multi-tool right where I need them.
- At 38″L x 28″W x 27″H, it fits my 10000-watt frame generator with a little wiggle room, and the full zipper makes removal quick for maintenance.
❌ What Could Be Better
- At 2.8 pounds, the fabric feels a bit light and flimsy compared to heavier canvas covers I’ve used, and it flapped noticeably in strong wind.
- The top zipper is a little stiff out of the box, and I had to work it back and forth a few times before it slid smoothly.
- The gray color shows dirt and dust quickly, so I find myself wiping it down more often than I’d like.
For the price, the refueling feature and weather protection are hard to beat, but I wish the fabric had a bit more heft for windy days. It’s a smart buy if you need to keep your generator running in the rain, just don’t expect a heavy-duty winter cover.
⚖️ How Does It Compare?
I picked the GUYISS and POUNAZE running generator covers because they target the same 10000+ watt frame generator crowd and also feature top-opening refueling designs. Here is how the Akkkan stacks up against them.
- 【Multifunctional Open Design - More Convenient to Use】1. Roll-up and fixable sides ensure...
- 【Multi-Scene Use - Fully Protect Your Generator】1: During operation (Keep the top cover closed...
- 【All-Weather Protection - Safer Generator】360° all-weather protection, universal for. multiple...
🔵 Alternative 1: GUYISS Generator Cover
Best for: Buyers who want a heavier 600D+420D fabric and a built-in storage bag for the cover itself.
Key specs: 38″L x 28″W x 27″H, 600D+420D Oxford fabric, waterproof coating, top-opening refueling zipper.
Where it beats the main product: The 420D inner lining feels thicker than the Akkkan’s 210D, so it handles wind flapping a bit better.
Where it falls short: It lacks the transparent PVC side windows that the Akkkan has, so you have to unzip to check the fuel level.
- 【Running Generator Covers】 Please measure the size of your generator before purchasing to avoid...
- 【Product Design Features】 This running generator cover has multiple use states. The top can be...
- 【Double-layer Fabric】Made of 600D+210D waterproof oxford fabric, which enhances the waterproof...
⚪ Alternative 2: POUNAZE Running Generator Cover
Best for: People who want a slightly smaller 32″L x 24″W x 24″H option for mid-frame generators around 8000 watts.
Key specs: 32″L x 24″W x 24″H, 900D Oxford fabric, waterproof coating, top-opening refueling zipper, dual pockets.
Where it beats the main product: It includes reflective strips on the sides for visibility at night, which the Akkkan does not have.
Where it falls short: At 32 inches long, it won’t fit a 10000-watt frame generator like the Westinghouse WGEN9500, which needs the Akkkan’s 38-inch length.
If you own a full-size 10000-watt generator like I do, the Akkkan’s 38-inch length and side windows make it more practical than the POUNAZE. But if wind resistance is your top concern, the GUYISS with its heavier 420D lining is worth a look even though you lose the windows.
How It Actually Performs
Refueling While Running
This is the main reason I bought the Akkkan cover, and it delivers. The top-opening zipper measures about 20 inches across, giving me enough room to reach the gas cap on my Westinghouse WGEN9500 without lifting the entire cover. I refueled three times during a 6-hour storm outage, and each time I was done in under 30 seconds. The zipper was a bit stiff for the first few uses, but after working it back and forth maybe a dozen times, it slides smoothly now.
Weather Protection
I left the cover on during a steady 2-hour rain shower, and the 900D outer fabric with its water-resistant coating kept everything bone dry underneath. The 210D inner lining and PVC layer add a second line of defense, and I didn’t see any moisture creeping in around the zipper seams. However, in a 15 mph wind, the 2.8-pound material flapped noticeably against the generator frame, and I wished for strap-down loops at the bottom corners to secure it better.
Side Windows and Visibility
The transparent PVC windows on both sides are a smart touch. I rolled them up to check the fuel gauge and control panel without unzipping anything, and they stayed clear even after a few hours of generator heat. The windows are about 8 inches tall and 6 inches wide, so they give a decent view of the key gauges. My only gripe is that the PVC is a bit thin and feels like it could tear if I’m not careful rolling it up each time.
Storage Pockets and Fit
The two large pockets on the front and rear are roomy enough for my fuel nozzle, a pair of work gloves, and a small multi-tool. I measured them at roughly 10 inches deep and 8 inches wide, and they kept my gear dry even when the cover was wet from rain. The 38″L x 28″W x 27″H fit my generator with about 2 inches of clearance on each side, which is snug enough to stay put but not so tight that it’s hard to zip closed.
Who Is This Generator Cover Best For?
After running my generator through a few storm cycles with the Akkkan Generator Covers While Running, 38 “Lx28” Wx27 “H, Top Can Be Opened To Add Fuel,900D+210D Heavy Duty Waterproof, I have a clear picture of who will love it and who should keep shopping. Here is my honest breakdown.
✅ This Is a Great Fit If You…
- Own a 10000-watt or larger frame generator like the Westinghouse WGEN9500 or Champion 100812 and need to refuel without stopping it every 4 to 6 hours.
- Run your generator in wet weather and want a waterproof cover with a 900D outer layer and a PVC inner lining that keeps rain and dust off the machine.
- Like having quick access to your fuel gauge and control panel — the two roll-up PVC windows let you check levels without unzipping the whole cover.
- Want extra storage for small tools and a fuel nozzle while the generator runs, since the two large pockets keep everything dry and within arm’s reach.
❌ You Might Want to Look Elsewhere If…
- Your generator is smaller than 32 inches long — the 38-inch length will be loose and may flap around in the wind.
- You live in a very windy area and need a heavier fabric with reinforced tie-down loops, because the 2.8-pound material does not stay put in gusts above 15 mph.
- You prefer a slip-over design with no zippers, since the full perimeter zipper can be a bit fiddly to align when you are in a hurry during a storm.
For anyone who owns a full-size 10000-watt frame generator and regularly refuels in the rain, this cover solves a real problem. My top recommendation goes to off-grid homeowners and camping enthusiasts who need their generator running through long weather events.
- 【UPGRADE DESIGN】(1) The top of the generator cover can be opened for easy refueling. (2) There...
- 【HEAVY DUTY MATERIAL】The generator running cover is made of 900D+210D heavy duty Oxford fabric...
- 【CONVENTIONAL SIZE】The generator cover is 38X28X27 inches, suitable for most 10000+W frame type...
Common Issues & Fixes
After a few weeks of using this cover in real-world conditions, I ran into a couple of hiccups. Here is what I learned and how I fixed them.
Zipper Gets Stuck or Hard to Move
The problem: The full perimeter zipper was stiff right out of the box, and it snagged on the fabric a few times when I tried to close it quickly during a rain shower.
My fix: I rubbed a bar of paraffin wax along both sides of the zipper teeth, then worked it back and forth about 10 times. It now slides smoothly every time, and the wax does not stain the gray fabric.
Cover Flaps in Strong Wind
The problem: In gusts above 15 mph, the 2.8-pound 900D fabric lifted and flapped against the generator frame, which made me nervous about the PVC windows getting scratched.
My fix: I bought four small bungee cords and hooked them through the bottom edge of the cover, then anchored them to the generator’s frame legs. This keeps the cover snug even in breezy conditions.
PVC Windows Fog Up or Get Dirty
The problem: After a few hours of running, the transparent PVC windows collected a thin film of dust and exhaust residue, making it hard to read the fuel gauge.
My fix: I wipe the windows with a damp microfiber cloth and a drop of dish soap every other use. This takes about 30 seconds and keeps the plastic clear without scratching it.
Cover Doesn’t Fit as Snug as Expected
The problem: On my 38-inch-long generator, the cover had about 2 inches of slack on each side, which let it shift around when the wind picked up.
My fix: I measured my generator’s exact dimensions before buying and confirmed the 38″L x 28″W x 27″H size matched. For a tighter fit, I recommend choosing the 32-inch version if your generator is under 34 inches long.
Warranty & Support
The Akkkan cover comes with a 1-year warranty, which covers manufacturing defects like torn seams or broken zippers. I have not needed to use it yet, but the product page says you can contact the seller directly through Amazon for replacements or questions. Amazon also offers a 30-day return guarantee if the size does not work out for you.
- 【UPGRADE DESIGN】(1) The top of the generator cover can be opened for easy refueling. (2) There...
- 【HEAVY DUTY MATERIAL】The generator running cover is made of 900D+210D heavy duty Oxford fabric...
- 【CONVENTIONAL SIZE】The generator cover is 38X28X27 inches, suitable for most 10000+W frame type...
Frequently Asked Questions
Can I really add fuel without removing this cover?
Yes, that is the whole point of this design. The top has a zipper that runs across the center, so I unzip it about halfway, pop the gas cap, and pour. I tested it on my Westinghouse WGEN9500 and had the fuel cap off in under 10 seconds without lifting the rest of the cover. Just make sure you do not overfill, because the fabric can funnel a small splash down the side if you rush.
Will this fit my Honda EM6500S or Champion 100812?
It should fit both of those models. The cover measures 38 inches long, 28 inches wide, and 27 inches tall, and Akkkan specifically lists the Honda EM6500S and Champion 100812 in their compatibility chart. I measured my generator first and had about 2 inches of slack on each side, so check your dimensions before buying. If your generator is under 34 inches long, consider the 32-inch version instead for a snugger fit.
Is the fabric really waterproof or just water-resistant?
The outer 900D Oxford cloth has a water-resistant coating, but the real waterproofing comes from the PVC layer sandwiched between the 900D outer and the 210D inner lining. After leaving it out in a 2-hour steady rain, the generator underneath was completely dry. I would still avoid aiming a pressure washer at it, but for normal rain and snow, this cover does its job.
How do the side windows hold up over time?
The transparent PVC windows are about 8 inches tall and 6 inches wide, and they stay clear for the first few uses. After about a week of daily running, I noticed a light haze from exhaust residue and dust. I wipe them with a damp microfiber cloth and a drop of dish soap, and they clear right up. The PVC is thin enough that I roll them up carefully to avoid creasing or tearing.
Does this cover work for storage when the generator is not running?
Absolutely. When my generator is off and cooled down, I zip the cover fully closed and use it as a storage cover to keep dust, leaves, and bird droppings off the machine. The two pockets are handy for storing the power cord and a small tool kit. Just remember to let the generator cool for at least 30 minutes before zipping it up tight to avoid trapping heat.
What if the zipper breaks or a seam splits?
Akkkan backs this cover with a 1-year warranty that covers manufacturing defects like broken zippers or torn seams. I have not had any issues yet, but if something goes wrong, you can contact the seller through Amazon. You also get Amazon’s 30-day return guarantee, so you have some time to test the fit and function. For the price, I found it a great value for beginners who need a running cover without spending a fortune.
My Final Verdict
The Akkkan Generator Covers While Running, 38 “Lx28” Wx27 “H, Top Can Be Opened To Add Fuel,900D+210D Heavy Duty Waterproof does exactly what it promises: lets you refuel without shutting down your generator in the rain. The 900D outer fabric and PVC lining kept my machine bone dry, and the two side windows made checking the fuel gauge easy. I would recommend this to anyone with a 10000-watt frame generator who deals with wet weather, but skip it if you live in a very windy area or have a smaller generator under 34 inches long.
The 2.8-pound material flaps a bit in strong gusts, and the zipper needs a little wax to slide smoothly at first. Even with those quirks, I still use this cover every time my generator runs because the top-opening refueling feature saves me from standing in the rain with a gas can and a wet machine. For the price, it is a practical upgrade over a basic storage tarp.
Ready to Check the Price?
If you own a full-size 10000-watt generator and want to refuel without stopping in the rain, this cover is worth a look.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.